Safety Precautions; User; Rotor And Accessories; Measures For Your Protection - OHAUS Frontier FC5706 Manuel D'instructions

EN-2
Warning and information signs on the surface of centrifuge
1.4

Safety Precautions

1.4.1

User

OHAUS centrifuges are intended exclusively for indoor use and for use by qualified personnel. This device may
only be operated by trained specialist stuff. They must have carefully read the operating manual and be familiar
with the function of the device.
1.4.2

Rotor and accessories

Only OHAUS original rotors and accessories shall be used. Any other use or intended use is considered improper.
OHAUS is not liable for damage resulting from improper use.
CAUTION:
Read all safety warnings before installing, making connections, or servicing this equipment. Failure to
comply with these warnings could result in personal injury and/or property damage. Retain instructions for
future reference.
1.4.3

Measures for your protection

WARNING: Never work in an environment subject to explosion hazards! The housing of the instru¬ment
is not gas tight. (Explosion hazard due to spark formation, corrosion caused by the ingress of gases)
WARNING: When using chemicals and solvents, comply with the instructions of the producer and the
general lab safety rules.
WARNING: The centrifuge is not sealed. Use suitable protection measures when using the centrifuge for
infectious and pathogenic samples. Follow appropriate safety precautions when handling these samples.
1.4.4

Exclude the following environmental influences

 Powerful vibrations
 Direct sunlight
 Atmospheric humidity greater than 80%
 Corrosive gases present
 Temperatures below 2 °C and above 35 ° C
 Powerful electric or magnetic fields:
WARNING:
Electrical shock hazards exist within the housing. The housing should only be opened by authorized and
qualified personnel.
Remove all power connections to the unit before opening.
Four carrier must be used at all times on four place swing out rotors or damage will
occur to the centrifuge. Such damage will not be covered under the product
warranty.
Attention! Check the fastening of the rotor nut before each run.
Take off mains plug before opening the housing or the emergency release.
TM
Frontier Centrifuge FC5706