JVC RX-DV31SL Manuel D'instructions page 69

To change the transmittable signals for
operating other manufacturers' DBS tuner
1
Press and hold DBS
2
Press DBS.
3
Enter the manufacturer's code using the
number buttons (1 – 9, 0).
See the table on the right to find the code.
4
Release DBS .
You can always perform the following operation:
DBS Turns on or off the DBS tuner.
After pressing DBS, you can perform the following
operations on the DBS tuner:
CHANNEL +/– Changes the channels.
1 – 9, 0, 100+ Selects the channels.
For channel number 5, press 5.
For channel number 10, press 1, then 0.
For channel number 23, press 2, then 3.
For channel number 135, press 100+, 3,
then 5.
• TV RETURN will function as the
ENTER button if your equipment
requires pressing ENTER after
selecting a channel number.
Note:
• Refer also to the manual supplied for your DBS tuner.
5
Try to operate your DBS tuner by pressing
DBS .
When your DBS tuner turns on or off, you have entered
the correct code.
If there is more than one code listed for your brand of
DBS tuner, try each one until the correct one is entered.
.
Manufactures' codes for DBS tuner
Manufacturer
Echostar
Gemini
General Instrument
Hamlin
Hitachi
Hughes
Jerrold
Macom
Magnavox
Oak
Panasonic
Philips
Pioneer
Primestar
RCA
Samsung
Scientific Atlanta
Sony
Tocom
Toshiba
Zenith
* "01" is the initial code.
Note:
• Manufacturers' codes are subject to change without notice.
If they are changed, this remote control cannot operate the
equipment.
Codes
40
02
01*, 41
03 – 06
42
43
07 – 15
16 – 18
19
20 – 22
23, 24, 44
25 – 30
31, 32
45
46
36
33 – 35
47
37
48
38, 39
66