Operations Through The Jpeg Control Screen; Repeat Playback - JVC RX-DV31SL Manuel D'instructions

Masquer les pouces Voir aussi pour RX-DV31SL:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Stopping slide-show playback completely
Press 7.
The JPEG CONTROL screen appears on the TV.
• For how to operate through the JPEG CONTROL screen,
see "Operations through the JPEG CONTROL Screen"
below.
Notes:
• The following functions are not available to the slide-show playback:
program playback, random playback, repeat playback, fast-forward/
reverse playback, on-screen bar, and choice menus.
• If a black screen continuously appears in the slide-show playback:
the file currently played may be non-baseline JPEG file. In this
case, select a playable file (a baseline JPEG file) again (e.g.,
pressing 7 or MENU to open the JPEG CONTROL screen, etc.).
Note that it may take a long time to select another file.
• Some files on a JPEG disc may be distorted during playback.
Operations through the JPEG
CONTROL Screen
You can search for and show the desired groups and files
through the JPEG CONTROL screen.
JPEG CONTROL screen
Current
Current group number/Total group number
group
JPEG CONTROL
Group : 02 / 03
FILE : 05 / 14 (Total 41)
Mountain
Anemone fish.jpg
Sea
Bonito.jpg
Sky
Butterfly fish.jpg
Dolphin.jpg
Garden eel.jpg
Manta ray.jpg
Seal.jpg
Swordfish.jpg
Tuna.jpg
Turtle.jpg
Whale.jpg
Whale shark.jpg
Current file
Current file number/
Total number of files in the current group
(Total number of files on the loaded disc)
Notes:
• You can check the group number and the file number on the display
window.
• Some group and file names may not be displayed correctly
because of the recording condition.
• The order of groups and files on a JPEG disc may be displayed
differently from the order displayed on your personal computer.
• Up to 12 groups and files are displayed on the TV at a time.
Pressing cursor 5 / ∞ / 3 / 2 repeatedly shows the hidden groups and
files one by one.
Showing the selected file
1
Select a group.
Press cursor 2 to move the highlight bar to the left group
list, then press cursor ∞ (or 5) repeatedly to select the
desired group.
• When you select a group, the file list of the selected
group is shown on the right.
2
Select a file.
Press cursor 3 to move the highlight bar to the right file
list, then press cursor ∞ (or 5) repeatedly to select the
desired file.
3
Press ENTER.
• When the still picture appears on the TV completely,
you can zoom in or out the still picture (see below).
• If you press 3, the slide-show playback starts from the
selected file.
Zooming in on the still picture
See also page 42.
Press ZOOM.
• Each time you press the button, the magnification changes
as follows:
x 1.8 ] x 4 ] x 8 ] x 16 ] x 32 ] x 64 ]
x 1 (normal play) ] (back to the beginning)
To move the zoomed-in position
Press cursor 5/∞/3/2.
To return to normal playback
Press ENTER.
To return to the JPEG CONTROL screen
Press MENU or 7.

Repeat Playback

You can repeat playback of the current group or all the files
on the loaded disc.
Highlight bar
& During playback or while stopped
From the remote control ONLY
Press REPEAT.
The repeat indication appears on the JPEG CONTROL
screen and the REPEAT indicator lights up on the display.
• Each time you press the button, the repeat mode changes
as follows:
REPEAT GROUP " REPEAT ALL "
the indication goes off " (back to the beginning)
REPEAT GROUP
REPEAT ALL
To cancel repeat mode
Press REPEAT repeatedly until the repeat indication goes off
from the JPEG CONTROL screen (the REPEAT indicator also
goes off from the display).
Repeats the current group.
Repeats all the files on the disc.
50

Publicité

Chapitres

Table des Matières
loading

Table des Matières