Mp3 Disc Playback; Basic Operations; Starting Playback - JVC RX-DV31SL Manuel D'instructions

MP3 Disc Playback

This unit can play back MP3 files on a CD-R or CD-RW. We
call such a disc "MP3 disc" in this instruction.
• Before using the remote control, press DVD to change
the remote control operation mode for the MP3 disc
operations.
• Turn on your TV and select the correct input mode on the
TV.
If " " appears on the TV when you press a button, the
disc cannot accept an operation you have tried to do.
7 Notes for MP3 discs
• MP3 discs (either CD-R or CD-RW) require a longer
readout time than normal discs. (It depends on the
complexity of the folder/file configuration.)
• When making an MP3 disc, select ISO 9660 Level 1 or
Level 2 as the disc format.
• This unit supports "multi-session" discs (up to 5 sessions).
• This unit cannot play "packet write" discs.
• This unit can play MP3 files only with the following file
extensions: ".MP3," ".Mp3," ".mP3," and ".mp3."
• ID3* tags cannot be shown on the display.
* An MP3 file can contain file information called an "ID3
Tag" where its album name, performer, track title, etc. are
recorded. There are two versions—ID3v1 (ID3 Tag
version 1) and ID3v2 (ID3 Tag version 2).
• It is recommended that you make each MP3 file at a
sampling rate of 44.1 kHz and at bit rate of 128 kbps. The
unit cannot play back files made at bit rate under 64 kbps.
• If both MP3 files and JPEG files are recorded on a disc, set
the MP3/JPEG setting in the PICTURE menu to "MP3" (see
page 54).
• Some MP3 discs may not be played back because of their
disc characteristics or recording conditions.
The following functions are not available to MP3 disc
playback:
• Program playback
• Random playback
• Fast-forward/reverse playback
• On-screen bar
• Choice menus
Note:
• Some tracks on an MP3 disc are skipped and may not be played
back normally.
47
Before using the remote control, press DVD to change the
remote control operation mode.

Basic Operations

You can also use the buttons on the front panel if they have
names similar to those on the remote control.

Starting playback

Load an MP3 disc, then press 3.
• The unit starts playback. The MP3 CONTROL screen
appears on the TV (see page 48).
• When all tracks in a group have been played, the unit plays
tracks in the next group.
Stopping playback temporarily
Press 8.
To start playback again
Press 3.
Selecting groups or tracks
To skip groups forward
Press TITLE/GROUP, then press ¢ as many times as
required.
To skip groups backward
Press TITLE/GROUP, then press 4 as many times as
required.
To skip tracks forward
Press ¢ as many times as required.
To skip to the beginning of the current track
Press 4 once.
To skip tracks backward
Press 4 as many times as required.
Stopping playback completely
Press 7.