Spypoint TINY-W Manuel De L'utilisateur page 27

52
stamp: Select or cancel imprinting date, time,
temperature and moon phases on photos.
Resolution: Set the photo resolution.
temperature: Select the temperature display in °F or °C.
Continuous: Allow the user to take pictures or videos
even if the memory card is full. The camera
will continue to record photos or videos by
deleting the first files recorded.
Power:
Allow the user to select the battery power or
the electricity power.
Infrared: Allow the user to choose how many LEDs
will be turned on.
On: Every LEDs work when taking photos
or videos at night.
One LEd: Only a single LED works (see
figure). This option can be useful when using
an IR-Booster/Black flash IR-Booster (sold
separately, refer to the section "OPTIONS").
Full moon:
New moon:
First quarter:
Last quarter:
High: 8 MP
Normal: 5 MP
Low: 3 MP
Off: LEDs are deactivated so your night
photos or videos are pitched black.
side sensors: When the side sensors are activated, a total of
7 zones is covered. The central sensor covers
5 zones. The side detectors are mainly used
to prepare the camera so when your target
passes through the central sensor, the system
is already pre triggered, increasing greatly
the reaction time of your camera.
s: side sensors
c: central sensor
Viewing angle
S
C
30°
S
Camera
Detection angles
(9m)
Note: The side sensors require more battery
power.
LED for
infrared
sensor
TINY-W
26'
40° 70°
(8m)
Detection distance
50'
(central)
(15m)
Detection distance
30'
of the side sensors
53