Spypoint TINY-W Manuel De L'utilisateur page 26

50
Press again "OK" to set the minutes. When
the time is properly set, press once more
"OK" to go back to other settings. For an
activation of 24 hours, the same start and stop
time must be entered (example: 00:00 as start
time and 00:00 as stop time. these hours are
the basic configuration of your camera)
Note: The hours can be recorded over a
12 or 24 hours period. Refer to "Setting"/
"Time format" (00:00 means midnight)
transmission: Enables or disables the wireless transmission
of images to the Blackbox receiver. Only
pictures are transmitted to the receiver,
not videos. the "Multi-shot" mode is also
disabled.
Note: The quality of the photos on
the receiver is reduced to maximize
transmission:
8MP = 800 x 600 pixels
5MP = 640 x 480 pixels
3MP = 320 x 240 pixels
delay: Select the time interval between two photos
or videos.
Multi-shot: Take up to 6 consecutive shots at each
detection, with a 10 second delay between
each photo. This option allows up to 6
pictures from different angles when the
camera is in "Photo" mode.
Video length: Allow the user to select the recording duration
when the camera is set in "Video" mode.
Language:
Select a language for the camera's menu.
sensitivity: Allow the user to choose between three
different levels of sensitivity: "High",
"Medium" or "Low". The camera will only
detect sources of heat in movement. Make
sure to have the least possible objects in front
of the camera during the positioning. This
prevents picture taken by the camera when
oriented towards the sun while an object
moves in front of the camera (e.g. a branch)
date: Set the date as Month / Day / Year
time format: Allow the user to choose between a 12 or
24 hours period time displays on the photos
(eg. 6:00 pm or 18:00)
time:
Set the time as Hour / Minute
51