Solution Filter Cleaning - Nilfisk SC401 Instructions D'utilisation

ENGLISH

SOLUTION FILTER CLEANING

1. Drive the machine on a level floor.
2. Ensure that the machine is turned off and the power supply cable plug (4) is disconnected from the electrical mains.
3. Close the detergent solution tank valve (A, Fig. 7). The valve is closed when it is in position (B) and it is open when it is in
position (C).
4. Remove the transparent cover (D) and the gasket (E), then remove the filter strainer (F). Wash and rinse them, then refit them
carefully onto the filter support (G).
5. Open the valve (A).
A
B
18
INSTRUCTIONS FOR USE
G
C
E
F
D
SC401, SCRUBTEC 344 - 9100002292
Figure 7
P100957
09/2017