System Requirements - Belkin SOHO OmniView F1DD102Lea Guide D'installation Rapide

Audio and Microphone Connections
NOTE: Speakers and microphones are not required for use of your KVM Switch.
Connect the Audio
Step 1.
Using the audio cable attached to your
speakers, connect the male 3.5mm plug
to the lime audio jack in the "Console"
section of the KVM Switch.
Step 2.
Using the mic cable attached to your
microphone, connect the male 3.5mm
plug to the pink mic jack in the "Console"
section of the KVM Switch.
Step 3.
Using the SOHO USB Cable Kit, connect
one end of the lime male 3.5mm plug to
the speaker jack of your sound card or
computer, and connect the other end to
the audio jack of the KVM Switch.
Step 4.
Using the KVM Cable, connect one end
of the pink male 3.5mm plug to the mic
jack of your sound card or computer, and
connect the other end to the pink mic
jack of the KVM Switch.

System Requirements | 2