Ce Declaration Of Conformity - Nice HOPP HO7124 Instructions Et Avertissements Pour L'installation Et L'utilisation

and declaration of incorporation of "quasi machinery"
Declaration in accordance with the Directives: 2004/108/EC (EMC); 2006/42/EC (MD) appendix II, part B
Note - The contents of this declaration correspond to declarations in the official document deposited at the registered offices of Nice S.p.a. and in partic-
ular to the last revision available before printing this manual. The text herein has been re-edited for editorial purposes.
A copy of the original declaration can be requested from Nice S.p.a. (TV) I.
Declaration number: 376/HOPP
Manufacturer's Name:
Address:
Person authorised
to draw up
technical documentation:
Address:
Product type:
Model / Type:
Accessories:
The undersigned, Luigi Paro, in the role of Managing Director, declares under his sole responsibility, that the product specified above con-
forms to the provisions of the following directives:
• DIRECTIVE 2004/108/EC OF THE EUROPEAN PARLIAMENT AND COUNCIL of 15 December 2004 regarding the approximation of
member state legislation related to electromagnetic compatibility, repealing directive 89/336/EEC, according to the following harmonized
standards:
EN 61000-6-2:2005, EN 61000-6-3:2007
The product also conforms to the following directive according to the requirements envisaged for "quasi machinery":
• Directive 2006/42/EC THE EUROPEAN PARLIAMENT AND COUNCIL of 17 May 2006 regarding machinery and which amends direc-
tive 95/16/EC (recasting)
• It is hereby declared that the pertinent technical documentation has been compiled in compliance with appendix VII B of directive
2006/42/EC and that the following essential requirements have been observed:
1.1- 1.1.2- 1.1.3- 1.2.1-1.2.6- 1.5.1-1.5.2- 1.5.5- 1.5.6- 1.5.7- 1.5.8- 1.5.10- 1.5.11
• The manufacturer undertakes to transmit to the national authorities, in response to a motivated request, all information regarding the
"quasi-machine", while maintaining full rights to the related intellectual property.
• Should the "quasi machine" be put into service in a European country with an official language other than that used in this declara-
tion, the importer is obliged to arrange for the relative translation to accompany this declaration.
• The "quasi-machine" must not be used until the final machine in which it is incorporated is in turn declared as compliant, if applica-
ble, with the provisions of directive 2006/42/EC.
The product also complies with the following standards:
EN 60335-1:2002 + A1:2004 + A11:2004 + A12:2006 + A2:2006 + A13:2008
EN 60335-2-103:2003
The product also complies, within the constraints of applicable parts, with the following standards:
EN 13241-1:2003, EN 12445:2002, EN 12453:2002, EN 12978:2003
Oderzo, 24 January 2011
14 – English

CE DECLARATION OF CONFORMITY

Revision: 0
NICE S.p.A.
Via Pezza Alta N° 13, 31046, Rustignè di Oderzo (TV) Italy
Mr. Oscar Marchetto
Via Pezza Alta N° 13, 31046, Rustignè di Oderzo (TV) Italy
"HOPP" Electromechanical gearmotor with built-in control unit
HO7124, HO7224
SMXI, OXI, PS124, Oview
Language: EN
Ing. Luigi Paro (Managing Director)