Protecting The Environment - Black & Decker PB100-B5 Mode D'emploi

ENGLISH
Picture 5
No. Name
a Blade holder
b Blender cup
c Seal ring
Hygiene information
Attention! The preparation of food for children and elderly
people requires consideration of special measures.All parts
in contact with food should sterilize before each use to
prevent the spread of germs.For additional information
please contact your local pharmacy or health food shop.
Cleaning and Maintenance
Before performing any maintenance:
• Switch off and disconnect from the mains supply.
• Wait for the appliance to completely cool down.
Warning! Do not immerse the appliance, the base, the cord
set or the plug in water or any other liquid.
• Wipe the exterior with a damp cloth.
• Do not use scouring pads.
• If necessary, use a mild detergent to remove spots.
• Do not use any abrasive or solvent based cleaner.
• Do not immerse the power base in water or any other
liquid.
CAUTION: Ensure that the blender is switched off before
removing it from the stand.
For blender attachment:
• Pour a little warm soapy water into the jar (4) and turn the
Control Knob (6) to "1" position and run the appliance for a
few seconds.
• Dissemble the jar from the motor unit and rinse it under
running water, then detach the blending blade assembly
from the jar assembly, detach the measure cup from the jar
6
(Original instructions)
a
b
Picture 6
cover. Finally, rinse the jar, blending blade assembly, jar
cover and measuring cup under running water.
• Dry all parts and then assemble them.
Troubleshooting
Problem
c
Machine does not
work.
Machine stops running
suddenly.
No reaction after knob /
button operation
Cannot open the blender
lid

Protecting the environment

Separate collection. This product must not be
disposed of with normal household waste.
Should you find one day that your BLACK+DECKER product
needs replacement, or if it is of no further use to you, do not
dispose of it with other household waste. Make this product
available for separate collection.
• BLACK+DECKER provides a facility for recycling
BLACK+DECKER products once they have reached the
end of their working life. This service is provided free of
charge. To take advantage of this service please return
your product to any authorised repair agent who will
collect them on our behalf.
• You can check the location of your nearest authorised
repair agent by contacting your local BLACK+DECKER
office at the address indicated in this manual.
Alternatively, a list of authorized BLACK+DECKER repair
agents and full details of our after-sales service and
contact are available on the Internet at:
www.2helpU.com.
Solution
Ensure jar is locked properly
with the unit Ensure the jar
cover is locked properly with
glass jar Make sure power plug
is plugged in properly.
Processing bowl may loosen
during vigorous processing.
Please re-install the bowl cover.
Reset to Off position and then
turn to ON position; Stop
current working program
It is a normal condition, the
machine is equipped with a
protective structure, please
remove the jar from the
machine before opening the lid