EUROM Fly Away 30 IPX4 Livret D'instructions page 11

Cleaning
Regularly empty the collection tray by pulling it out
of the side of the device. Too much dust will
adversely affect the effectiveness of the light and
too much dirt will affect the way insects are
destroyed. So clean the
device regularly. To do that, pull the plug out of the
power socket and remove the collect tray. When
you now place the device on a work surface, you
can remove dust and dirt, for example with a
vacuum cleaner, duster or soft brush. Do not use
any moisture or corrosive cleaning agents in the
insect-killer. You can dust off the outer side of the
device using a soft cloth.
Possible defects/problems
The lamps do not light up
 The lamp is not making contact. Repair it.
 The lamp has blown. Replace it.
 The starter is defective. Let it be replaced.
 The induction coil is defective. Let it be replaced.
 The plug is not inserted properly into the power socket. Insert it properly.
There is no power to the electrified screen
 There is a break in the power cable to the screen. Have it repaired.
 There is a short-circuit in the transformer. Let it be repaired/replaced.
Before making any repairs, always ensure the plug has been removed from
the power socket!
Removal
CE – Declaration
See page 34.
In the EU this symbol indicates that this product may not be
disposed of as ordinary household waste. Old equipment contains
valuable materials, suitable for recycling. These materials should
be made suitable for reuse in order to prevent any adverse effects
to health and the environment caused by unregulated waste
collection. Therefore, please make sure that you bring old
equipment to a designated collection point. Alternatively, contact
the original supplier, who can make sure that as many of the
components as possible can be recycled.
11