shark GS300 Série Manuel Du Propriétaire page 9

USING YOUR GARMENT STEAMER
fig. 10
fig. 9
STAND STEAMING
1 Plug the steamer into an electrical
outlet and turn the On/Off Switch
to the "I" position, a blue LED
light will illuminate. (fig. 9)
2 The steam will start emitting after
1 minute.
3 Hang your desired garment on the
garment hook. Begin steaming
the garment in an up and down
motion pressing the steam nozzle
on the fabric. (fig. 10)
CAUTION: Steam hose and metal
spring can become hot during use.
Never hold the hose while in use.
When steaming garments, hold it
always by the steam nozzle.
GARMENT HOOK
PORTABLE/TABLETOP
STEAMING
1 Use the steamer in portable or
tabletop mode to freshen fabrics
all around your home.
WARNING: Do not use on leather,
suede, or leather like materials.
2 Remove the steam unit from
the base, by pulling the release
button towards you (see assembly
section for more detail p. 6)
3 Plug the steamer into an electrical
outlet and turn the unit on.
4 Hold the unit at waist level in one
hand or place on a table. (fig. 11)
fig. 11
5 Begin steaming the fabric,
upholstery or garment in an up
and down motion pressing the
steam nozzle on the fabric.
IMPORTANT: Make sure to hold
the water tank level to the floor.
The steam hose should be fully
extended for best steam results
and to avoid gurgling.
WARNING: The steam hose and
metal spring become hot during
usage.
www.sharkclean.com
ENGLISH
9