Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
7.1
Optional locking cylinder for the cover lock
Installing the locking cylinder
–
Insert springs
E
.
Info
The kit contains many small parts. It is recommen-
ded that you perform the assembly while seated at
a table.
500644-01
–
Insert tumblers
chambers
500645-01
–
Insert the key and check whether the tumblers with the
number 1 are correct.
Info
The tumblers must close flush with the locking
cylinder.
–
Replace the non-matching tumblers with ones that have
the matching number.
500517-01
Info
It is recommended that you note the numbers of
the matching tumblers so that the subsequent
locking cylinders can be equipped immediately.
–
Repeat the steps for chambers
first six chambers are fitted with the correct tumblers.
–
Insert the key.
All tumblers must close flush with the locking cylin-
der.
500518-01
bm
(included) into chambers
bl
(included) with the number 1 into
A
C
E
,
, and
.
B
D
,
OPTIONAL 7
A
C
,
, and
F
, and
until the
15
Publicité
Table des Matières
