KTM TOURATECH TOP CASE Mode D'emploi page 30

5 ASSEMBLY
5.1
10
Assembly
Warning
Danger of accidents Loading luggage can significantly affect the handling characteristics.
–
When the topcase is fitted, the handling characteristics, as well as the cornering and braking cha-
racteristics, may change due to greater crosswind sensitivity, especially with a full load. Beware of
strong winds. Due to the changed handling characteristics, approach the permitted maximum speed
of 150 km/h slowly.
Warning
Danger of accidents Never exceed the payload of 5 kg.
–
Distribute the load evenly and secure it against slipping.
Info
When using a pressure cleaner, maintain a distance of at least half a meter from the Top Case. Use a neu-
tral detergent (water with mild soap).
500644-01
500645-01
500517-01
Condition
The luggage rack 60612910044 (not included) is required to
mount the Top Case.
Mounting the locking cylinder
–
bm
Insert springs (included) into chambers
E
.
Tip
The kit contains many small parts. It is recommen-
ded that you perform the assembly while seated at
a table.
–
bl
Insert tumblers (included) with the number 1 into
A C
chambers , , and
–
Insert the key and check whether the tumblers with the
number 1 are correct.
Info
The tumblers must close flush with the locking
cylinder.
–
Replace the non-matching tumblers with ones that have
the matching number.
A C
, , and
E
.