Güde 330/20-4 Traduction Du Mode D'emploi D'origine page 29

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 31
Before using, always visually inspect to see that
the blades, blade bolts and cutter assembly are not
blunt, worn or damaged. Replace worn or damaged
blades and bolts in sets to preserve balance;
The protective equipment on the appliance is
strictly prohibited to be disassembled, changed,
used in conflict with the designation and it is
prohibited to attach any protective equipment of
other manufacturers.
The appliance must not be used if damaged or
safety equipment is defective. Replace any worn-out
and damaged parts.
Do not start the engine before your feet are in a safe
distance from the cutting tools.
Do not incline the appliance when being started.
Do not start the appliance when you are standing in
front of the ejection opening.
Do not race when working with the appliance. Walk
slowly and cautiously.
Be careful when going backwards – risk of tripping!
Make sure your posture is safe, especially on slopes. Do
not cut on too steep slopes. Be particularly careful when
changing travelling direction on slopes.
On slopes always go straight to the slope and not up
and down.
Pay maximum attention when turning around and
pulling the appliance to you.
Switch the mower off whenever carrying or inclining it
or when being outside a grass area. Wait until all rotating
parts have stopped.
If an undesirable item is encountered or the appliance
starts vibrating, the appliance must be switched off and
the socket plug removed. Check whether the appliance
is not damaged. Repair any damage.
Switch the appliance immediately off after finishing
your work.
• Stop the machine and take out the contact key. Wait
until all rotating parts have stopped and the unit has
cooled down. Take out the key.whenever you leave
the lawnmower.
• To release a blocked blade.
• To adjust the mowing height.
• To empty the collection bag.
• Check the machine if working perfectly after catching
an undesirable object. Repairs must be executed
before putting the machine into operation again..
• To lift the machine or take it away..
• To flip the mower over or carry it (e.g. from lawn to
lawn or across a road).
• Clean the mower or do any other works before
checking the mower.
The ON/OFF switch and safety switch must not be
locked.
Use only those batteries for the power tool that have
been designed to be used for that tool. Use of other
batteries may lead to injuries and a risk of fire..
Avertissement: Cet outil électrique génère pendant
le fonctionnement un champ magnétique. Dans
certaines circonstances, ce champ peut perturber
le fonctionnement des implants médicaux actifs ou
passifs. Afin de réduire le risque de blessure graves
ou mortelles, nous recommandons aux personnes
portant un implant médical de consulter un médecin
et le fabricant de l'implant médical avant l'utilisation
de l'appareil.
Do not use the device near flammable liquids or
gases. Risk of fire and explosion in case of short
circuit.
Maintenance
Rotating blade
Any works / adjusting on the machine to be only
performed with the engine switched off, contact
key taken out and when the mowing blade is not
moving.
Switch the appliance off and remove
the contact key before any adjustment,
cleaning and servicing work. Wait until all
rotating parts have stopped and the appli-
ance cooled down. After each use, clean
carefully the cutter bar. Wipe it with a cloth
moistened in oil or apply metal treatment
spray on it.
Keep the machine clean. Regularly clean the grass
ejection chute and machine body. Keep the device, in
particular the air vents, clean at all times. Never spray
water on the device body! Do not clean the plastics with
solvents, flammable or toxic fluids. For cleaning, use a
damp cloth only.
Apply environment-friendly oil to all moving parts.
Check the collection bag at regular intervals for any
wear and aging.
Repairs and works specified in these Instructions may
only be performed by qualified authorised staff.
Use only original accessories and original spare parts.
Only a regularly maintained and treated appliance can
serve as a satisfactory aid. Insufficient maintenance and
care can lead to unforeseen accidents and injuries.
If necessary, a list of spare parts can be found at www.
guede.com.
Machine to be stored in a dry place.
Disposal
The disposal instructions are based on the icons placed
on the appliance or its package.
Any damaged or disposed devices must be delivered to
appropriate collection centres.
ENGLISH
25

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

95809

Table des Matières