Disposal And Recycling; Technical Data - EINHELL HGG 300 Niro Mode D'emploi D'origine

Projekt1__ 26.06.13 14:14 Seite 9
9. Storage
9.1 Equipment
Store the equipment and its accessories out of
children's reach in a dark and dry place at
above freezing temperature. The ideal storage
temperature is between 5 and 30 °C. Store the
equipment in its original packaging.
9.2 Liquid gas cylinder
Never store the liquid gas cylinder inside the
■
house, in rooms below ground level or in
non-ventilated areas!
The valves on the liquid gas cylinder must
■
have valve guard caps and lock nuts.
Gas cylinders must be stored upright, even
■
when they are empty.
10. Connection diagram (Fig. 3)
Q1 ON/OFF switch
F1 Fuse-thermostat
M1 Fan motor
Y1 Thermoelectrical ignition guard (gas valve)
Y2 Safety solenoid valve
B1 Thermal element
B2 Piezo ignition
B3 Ignition electrode
B4 Burner

11. Technical data

Rated thermal load:
Air throughput:
Gas consumption:
Equipment category:
Country of destination:
Type of gas:
Operating pressure P:
Mains connection: 230 V ~ 50 Hz, 0.17 A, 38 W
Temperature class:

12. Disposal and recycling

The equipment is supplied in packaging to
prevent it from being damaged in transit. The
raw materials in this packaging can be reused
or recycled. The equipment and its accessories
are made of various types of material, such as
metal and plastic. Defective components must
be disposed of as special waste. Ask your
dealer or your local council!
To comply with European Directive 2002/96/EC
concerning old electric and electronic
equipment and its implementation in national
laws, old electric power tools have to be
separated from other waste and disposed of in
an environment-friendly fashion, e.g. by taking
to a recycling depot.
max. (Hi) 30 kW
500 m 3 /h
G 31: 2150 g/h
I3P
GB/IE
Standard propane
1500 mbar (propane)
76°C
For EU countries only
Never place any electric power
tools in your household refuse.
GB
9