Rigging The 8Xt Or 12Xt Enclosure With The Omnimount; Accessories - L-Acoustics Coaxiale XT Serie Mode D'emploi

XT
COAXIAL RANGE -
rigging procedures
VERSION 2.0
6.6

Rigging the 8XT or 12XT enclosure with the OMNIMOUNT

Four inserts with screws located on the rear face of the 8XT and 12XT enclosures allow fixing OMNIMOUNT

accessories.

OMNIMOUNT ® fixing procedure:
1. Remove the four screws from the inserts (use a Torx
them in a safe place as they will be used to fix the rigging accessory.
2. Follow the instructions provided by the OMNIMOUNT
 OMNIMOUNT 30.0 SERIES for the 8XT enclosure.
®
 OMNIMOUNT
® 120.0 SERIES for the 12XT enclosure.
L-ACOUSTICS recommends using an additional safety point when rigging enclosures.
!
A safety eyebolt accessory can be added using the M8* insert located on the rear face of the 8XT
and 12XT enclosures (see Figure 23).
WARNING
* The "M8" notation refers to the European standard (please see applicable external documentation).
XT-P_RM_ML_2.0
P
SELF-POWERED COAXIAL RANGE
Figure 23: Inserts on the 12XT enclosure
® screwdriver, T30 for 8XT or T40 for 12XT) and keep
manufacturer to fix an accessory of the:
®
w w w . l - a c o u s t i c s . c o m
accessories
®
Insert for safety
eyebolt accessory
Four inserts with
screws for
OMNIMOUNT ® fixing
rigging
®
24 en