Etr12-2 Mounting Accessory - L-Acoustics Coaxiale XT Serie Mode D'emploi

XT
COAXIAL RANGE -
rigging procedures
VERSION 2.0
5.2

ETR12-2 mounting accessory

The L-ACOUSTICS ETR12-2 U-bracket (Figure 5) is dedicated to attach an L-ACOUSTICS
®
enclosure. It can be either fastened to a wall or suspended from a structure or ceiling (typically for under-balcony
applications).
!
The ETR12-2 can support a maximum of one 12XT or 112P.
ALWAYS secure the ETR12-2 to concrete wall or ceiling using three 10 mm/0.4 inch screws and
three corresponding expansion anchors designed to support at least 5 times the total weight of the
enclosure/U-bracket assembly. Note: The screwing material is not provided.
WARNING
XT-P_RM_ML_2.0
P
SELF-POWERED COAXIAL RANGE
Main bar
Spring-loaded safety
Pivoting arm
Ball locking pin
Studs
Figure 5: The ETR12-2 mounting accessory
w w w . l - a c o u s t i c s . c o m
®
Fixed arm
12XT or 112P
10 en