Stacking Or Flying The Kudo - L-Acoustics KUDO Multi-Mode WST Manuel D'utilisation

® ® ® ®
KUDO KUDO KUDO KUDO
multi multi- - - - m m m m ode multi multi
use user r r r manual use use manual manual manual
VERSION 2.0
A simple mechanical operation allows the user to configure each K-LOUVER
®
K-LOUVER latches and slide the K-LOUVER
pattern) until the latches lock automatically (see Figure 6).
Two latches
mounted on each
®
K-LOUVER
Towards interior
6.1.3

Stacking or flying the KUDO

®
The KUDO fully integrated four-point rigging (Figure 3) features one rotating arm per side allowing to assemble
multiple enclosures with inter-enclosure angles from 0° to 10° in 1° increments. This allows various setups in flown or
stacked configurations such as:
•
Flying a vertical array of up to 21 KUDO
(see Figure 1).
•
Flying a horizontal array of up to 7 KUDO
•
Stacking a vertical array of up to 6 KUDO
structure, using the complimentary L-ACOUSTICS
!
Refer to the "KUDO
specific rigging procedures.
WARNING
KUDO_UM_ML_2-0
® ® ® ®
ode ode wst ode wst wst wst e e e enclosure nclosure nclosure nclosure
®
towards interior (to obtain 55° coverage pattern) or towards exterior (25°
®
K-LOUVER
Figure 6: K-LOUVER
®
®
enclosures using the L-ACOUSTICS
®
enclosures per L-ACOUSTICS
®
enclosures onto the L-ACOUSTICS
®
'' rigging procedures manual to get acquainted with the KUDO
w w w . l - a c o u s t i c s . c o m
®
in the desired position: rotate both
Towards exterior
®
setting procedure
®
®
KJACKx2 rigging accessories.
®
KBUMP rigging structure
KLIFT rigging accessory.
®
KBUMP rigging
®
system
12 en 12 12 12