Gewiss CHORUS GW 16 974CB Manuel De Programmation page 71

USER INSTRUCTIONS
Humidity threshold activation 4
Press the button key to access value change; after the
access, the current parameter value is displayed. Change
the activation status for humidity threshold 4 (0 =
deactivate; 1 = activate) through the circular touch slider
or the push-button
change of the threshold activation status has been
authorised by ETS. To confirm the set value, press the
button key within thirty seconds; expiry of the timeout (30
seconds) or pressing the push-button
the change page without saving it.
Humidity threshold activation 5
Press the button key to access value change; after the
access, the current parameter value is displayed. Change
the activation status for humidity threshold 5 (0 =
deactivate; 1 = activate) through the circular touch slider
or the push-button
change of the threshold activation status has been
authorised by ETS. To confirm the set value, press the
button key within thirty seconds; expiry of the timeout (30
seconds) or pressing the push-button
the change page without saving it.
Humidity threshold 1
Press the button key to access value change; after the
access, the current parameter value is displayed. Adjust the
humidity threshold value 1 (range can be set from 1% to
100%) using the circular touch slider or the
button. The parameter is only displayed if the threshold has
been activated from ETS or Easy Controller. To confirm the
set value, press the
expiry of the timeout (30 seconds) or pressing the push-
button result in exiting the change page without saving
it.
71
. The parameter is visible only if the
result in exiting
. The parameter is visible only if the
result in exiting
button key within thirty seconds;
E
N
G
L
I
S
H
push-