Gewiss CHORUS GW 16 974CB Manuel De Programmation page 55

USER INSTRUCTIONS
Setting the temperature measurement unit
Press the button key
access, the current parameter value is displayed. Select the
temperature measurement unit (°C = Celsius; °F =
Fahrenheit) through the circular touch slider or the push-
button. . To confirm the set value, press the
key within thirty seconds; expiry of the timeout (30 seconds)
or pressing the push-button
page without saving it.
Display back-lighting intensity
Press the button key
display light intensity percentage level; after the access, the
current parameter value is displayed. Adjust the value using
the circular touch slider or the
can be set from 30% to 100%). To confirm the set value,
press the button key within thirty seconds; expiry of
the timeout (30 seconds) or pressing the push-button
result in exiting the change page without saving it.
Acoustic signalling of push-button pressing
Press the button key
access, the current parameter value is displayed.
Activate/deactivate acoustic signalling associated to
pressing the push-buttons (0 = deactivate; 1 = activate)
through the circular touch slider or the push-button
confirm the set value, press the
seconds; expiry of the timeout (30 seconds) or pressing the
push-button result in exiting the change page without
saving it.
Thermostat control type
Press the button key
access, the current parameter value is displayed. Change
the thermostat control type (0 = HVAC; 1 = setpoint) through
the circular touch slider or the push-button
parameter is visible only if the device is configured with
Easy Controller. To confirm the set value, press the
button key within thirty seconds; expiry of the timeout (30
seconds) or pressing the push-button
the change page without saving it.
55
to access value change; after the
result in exiting the change
to access the change to the
push-button (the range
to access value change; after the
button key within thirty
to access value change; after the
result in exiting
button
E
N
G
L
I
S
H
. To
. The