Key Definitions - Petsafe PIG19-16412 Manuel D'utilisation

Key Definitions

Fence Transmitter: Transmits the signal through the
boundary wire.
Pet Area: The area within your garden where your pet can
roam freely.
Warning Zone: The outer edge of the pet area where your
pet's receiver collar begins to beep, warning him not to go
into the static stimulation zone.
Static Stimulation Zone: The zone beyond the warning
zone where your pet's receiver collar will emit a static
stimulation, signalling him to return to the pet area.
Boundary Width: The combination of the warning zone
and the static stimulation zone.
Receiver Collar: Receives the radio signal from the
boundary wire.
Stimulation Level Button: Adjusts the level of static
stimulation your pet receives in the static stimulation zone.
Receiver Indicator Light: Indicates the level of stimulation
at which the receiver collar is set. This light also indicates
battery status.
Contact Points: Deliver the safe static stimulation when your
pet moves into the static stimulation zone.
Power Jack: Where the power adaptor plugs into the
fence transmitter.
Boundary Wire Terminals: Where the boundary wires
connect to the fence transmitter in order to complete a
continuous loop.
Loop Indicator Light: Indicates that the boundary
wire makes a complete loop, enabling the signal to
be transmitted.
Boundary Width Control: Adjusts the width of the
warning and static stimulation zones. Note: Adjusting this
knob does not change the level of static stimulation on the
receiver collar.
6
Receiver Collar
Stimulation
Level Button
Fence Transmitter
Power
Jack
petsafe.com
Pet Area
Static
Stimulation
Zone
Boundary
Width
Warning
Zone
Receiver
Battery
Indicator Light
Contact Points
Power
Boundary
Light
Width
Control
Boundary Wire
Terminals
Loop
Indicator
Light