Fein AMM 700 1.7Q Mode D'emploi page 14

en
14
Handling the battery.
Store, operate and charge the battery only
using FEIN battery chargers within the oper-
ating-temperature range between 5°C – 45°
C (41°F – 113°F). At the beginning of the
charging procedure, the battery temperature
must be within the battery operating-temper-
ature range.
Battery charge-control indicator
(figure 3).
Press the button to activate the LED indica-
tion.
LED indicator Meaning
1 – 4 green Percentage
LED of charge
condition
Continuous Battery is
red light almost
empty
Red flashing Battery is
light not ready
for opera-
tion
The real percentage of the battery charge
condition is only indicated when the power
tool motor is stopped.
The electronics automatically switch off the
motor prior to the battery being deep dis-
charged.
Mounting the depth stop (figure 4).
Mount the depth stop with the 2 screws to
the bottom side of the gear case.
Activity
Operation
Charge battery
Bring the bat-
tery into the
battery operat-
ing-tempera-
ture range, then
charge
Fig. 3
Fig. 4
Depth stop
≤
100 %
≤
75 %
≤
50 %
≤
25 %
=
0 %
1.
2.
Screws