Publicité
Les langues disponibles
Les langues disponibles
Intended use of the power tool:
hand-guided power tool for use in weather-
protected environments without water sup-
ply, using the application tools and accessories
recommended by FEIN:
– for cutting polyurethane beads for glazier
work in automobiles, trucks and busses
Symbols.
Symbol, character
Explanation
Make sure to read the enclosed documents such as the Instruction
Manual and the General Safety Instructions.
Do not touch the saw blade. Danger of sharp application tools moving
back and forth.
Warning against sharp edges of application tools, such as the cutting
edges of the cutter blades.
Observe the instructions in the text or graphic opposite!
Before commencing this working step, remove the battery from the
power tool. Otherwise there may be danger of injury caused by
unintentional starting of the power tool.
Use eye protection during operation.
Wear hearing protection while working.
Use a dust mask during operation.
General prohibition sign. This action is prohibited.
Do not charge damaged batteries.
Keep the battery away from fire. Protect the battery against heat,
e. g. against continuous intense sunlight.
Observe the notes in the text aside!
Switching on
Switching off
Confirms the conformity of the power tool with the guidelines of the
European Community.
This symbol confirms the certification of this product for the USA and
Canada.
– for sawing out chassis sections and remov-
ing underseal materials
– for sanding of chassis parts
en
9
Publicité
