The Issues To Be Considered For Efficient Operation And Energy Saving - CombiSteel 7464.0055 Mode D'emploi


Do not perform any maintenance and repairs while your deep freezer is plugged in. Disconnect the
electrical connection of your deep freezer by turning off the switches or unplugging your deep freezer
in case of any failure or while performing maintenance and cleaning. Otherwise, it can cause death or
serious injuries.

Unplug your deep freezer or turn off the switch it is connected before cleaning your deep freezer.

While you are unplugging your deep freezer, make sure you always hold head of the plug. Do not ever
hold and pull from its cable.

While cleaning your deep freezer and its perimeter, do not wash it by pressurized water or a hose, use
a wet cloth. Otherwise, the water which may penetrate into the electrical assemblies of the product
may cause electric shock or fire risks.

Do not ever use hot water, alcohol, cleaning powders, electrical heater, steamed cleaning appliances,
hard/pointy tools and similar things in order not to damage your deep freezer during cleaning.

When, the door glass of your deep freezer is damaged, do not touch your deep freezer, in case of electric
shock risk. Immediately unplug your deep freezer. Contact the authorized technical service after
replacing the frozen goods in your deep freezer in another deep freezer or a suitable environment.

This product is not designed for operation by persons with insufficient physical, emotional or
mental ability or knowledge and experience (including children), unless these persons are observed
and supervised or informed by a person responsible for their safety.

Do not remove any other exterior protection cover except the ones mentioned in this operating manual.

Do not touch the metal interior parts of your operating product with bare hands.

Keep the packing material in a place where children cannot access them, because they may cause hazard
for children.

Do not ever keep any products containing flammable gas and explosive materials in your deep freezer.
THE ISSUES TO BE CONSIDERED FOR EFFICIENT OPERATION AND ENERGY
SAVING

The deep freezer should be operated in operating conditions appropriate with the class mentioned on
its type label.

Place your deep freezer at a location which is distant to the heating sources.

Place your deep freezer at a location, where it shall not be exposed to direct sunlight.

Do not leave the door of your deep freezer open for a long time.

While you are placing your deep freezer, maintain minimum 10 cm spaces from the top, rear and sides
of your deep freezer. If, you will place another deep freezer or a refrigerator next to it, please be careful
that the space between both units is minimum 30 cm. Otherwise, the performance of the product will
decrease and the product will consume more power, because it cannot perform heat exchange well.

Load your deep freezer and do not exceed the maximum loading capacity mentioned on the label (if
there is any) to make sure air circulation is possible.

Do not ever cover or close the ventilation holes (the plastic front grid, rear grid) of your deep freezer.

For productive usage of your deep freezer, make your condenser maintained / cleaned by the
Authorized technical services at least two times in a year.
www.combisteel.com
6