Transport; Before Calling The Service; Compliance Standards - CombiSteel 7464.0055 Mode D'emploi

Transport

Please, clean your deep freezer before a transport. During transport, handle the deep freezer in vertical position.
It is mandatory for the deep freezer to be handled in accordance with the norms, procedures and laws
determined by the related country, when the deep freezer is out of use, because dilation gas (C-Pentane)
is used in insulation of it.

BEFORE CALLING THE SERVICE

If, your deep freezer is not operating:

The plug of the deep freezer is not inserted properly into the socket.

There is not electricity at the socket or the fuse is blown.

Please, check whether there is a power cut or the plug is inserted into the socket.
If, your deep freezer is running more than required and frequent;

The door of your deep freezer is opened frequently or kept open for a long time.

The compressor part of your deep freezer is not ventilated, well or the condenser gets dusty. It is
required to be cleaned.

There is not enough space around the deep freezer.
If, your deep freezer does not cool enough;

The door of your deep freezer is opened frequently or kept open for a long time.

The air circulation inside your deep freezer is not sufficient, because the maximum loading capacity is
exceeded.

The condenser maintenance / cleaning is not performed.
If, your deep freezer stinks;

The smelly food materials are kept in open containers.

The interior part of the deep freezer is not clean enough.
If, your problem is still continuing, after you have checked the above mentioned issues and done what is
necessary, please contact our call center with the model and serial number of your deep freezer and tell your
problem.

COMPLIANCE STANDARDS

The Deep Freezers in this Operating Manual are manufactured and tested in accordance with the following
Standards and Directives:
TS EN ISO 23953-1
TS EN ISO 23953-2
TS EN 60335-2-89
IEC 60335-2-89,
2006/95/EC,
2004/108/EC
www.combisteel.com
14