Cleaning, Maintenance And Transport; Defrost Process; Cleaning; Holidays/Suspending Operation - CombiSteel 7464.0055 Mode D'emploi

CLEANING, MAINTENANCE AND TRANSPORT

Defrost process

Defrost is melting of frost deposit and ice accretion accumulates in your deep freezer. The VF 500 model deep
freezers are equipped with an automatic defrost system in order to melt the ice accretion which may occur before
the evaporator seen from the interior fan grid.
For the VF 372 model frozen food storage cabinets, the racks may have frost deposits or ice accretions in time.
The manual defrost process should be performed because this condition will cause the cooling capacity
decreased and excessive power consumption.
Manual defrost process
(Only for the VF 372 type frozen food storage cabinets)

Replace the frozen goods in your deep freezer in another deep freezer or a suitable environment.

Unplug your deep freezer.

Wait for the ice accretion accumulated in the deep freezer to melt.
Do not use any mechanical devices or apply any other methods in order to accelerate the defrost process
other than the ones recommended by the manufacturer.
Wipe and dry the inside of the deep freezer by using a sponge or a soft cloth after the defrost process. Plug your
deep freezer into the socket and start it. Wait for your deep freezer to reach the operating temperature in order
to load your frozen goods in it.

Cleaning

 Always weak a protective gloves for preventing from the injuries during cleaning.
 Do not ever use hot water, alcohol, cleaning powders, electrical heater, steamed cleaning appliances,
hard/pointy tools and similar things in order not to damage your deep freezer during cleaning.

Make your condenser maintained / cleaned by the Authorized technical services at least two times in a
year.

Replace the frozen goods in your deep freezer in another deep freezer or a suitable environment.

Unplug your deep freezer.

Wait for the ice accretion accumulated in the deep freezer to melt, if there is any ice accumulation inside
your deep freezer or any liquids falls and becomes frozen.

Only for the VF 500 type deep freezers; discharge the liquid by removing the drainage plug. After,
drainage is completed, do not forget to reattach the drainage plug. Otherwise, there may be ice
accretion during operation.

Wipe the interior parts of your deep freezer by using the mixture which you will prepare by adding 2
teaspoons of sodium bicarbonate in 1L of water.

Dry the interior parts of the product by means of a sponge or a soft cloth.

You can clean the exterior parts of your deep freezer by using a wet cloth and then dry it by a dry one.
After cleaning, plug your deep freezer into the socket and start it. Wait for your deep freezer to reach the
operating temperature in order to load your frozen goods in it.

Holidays/suspending operation

If, you will go to a long-term vacation or you will not use the unit for a long time, please perform the cleaning
process. Leave the door of your deep freezer open for preventing scent build-up.

If, your deep freezer will be kept in a closed environment, it will be advantageous for your deep
freezer to cover it by a cotton cloth for increasing its life cycle.

Do not cover your deep freezer by a plastic cover. Plastic will cause your deep freezer sting and
precipitate because it does not let any air in. Corrosion can be observed on your deep freezer as a
result of precipitation.
www.combisteel.com
13