General Warnings - CombiSteel 7464.0055 Mode D'emploi

GENERAL WARNINGS


Please, check whether your deep freezer has any damages when you buy it. Please, do not start
a damaged deep freezer.

The following rules should be taken into consideration for a non-hazardous and safe operation.

The installation, positioning, operation, maintenance and cleaning of your deep freezer should be
performed in accordance with the operating manual. Please, do not perform any other practice other
than the ones described in this operating manual. If, your deep freezer is damaged or fails due to a
practice mentioned above, it will be out of the guarantee scope.

The package of your deep freezer is manufactured from recyclable materials.

Please, keep the certificates and other documents for potential future use.

Please, do not forget that the UV rays of the Sun will affect the food in the deep freezers with glass
doors. Position your deep freezer (even if it is empty) at an appropriate location where it cannot be
subjected to direct sunlight.

This product is not suitable for using in places with fire, explosion or radiation risk.

Unless, otherwise explicitly mentioned, do not place your deep freezer in open environments where
your deep freezer can penetrate water.

While you are placing your deep freezer, maintain minimum 10 cm spaces from the top, rear and sides
of your deep freezer in order to ensure air circulation. If, you will place another deep freezer or a
refrigerator next to it, please be careful that the space between both units is minimum 30 cm.

Clean the inside of your deep freezer before first use.

For the VF 500 type deep freezers, please make sure that the drainage plug of your deep freezer is
attached during operation. Otherwise, there may be ice formation around the drainage hole.

The deep freezer should be operated in operating conditions appropriate with the class mentioned on
its type label.

Do not ever cover or close the ventilation holes (the plastic front grid, rear grid) of your deep freezer.

Please, prefer original components for or any replacement parts which is required to be installed on the
product.

Do not ever use the base, racks, door and similar parts of your deep freezer as a support or a step.

Do not use any electrical tools in your deep freezer.

Do not use any mechanical devices or apply any other methods in order to accelerate the defrost
process other than the ones recommended by the manufacturer.

While loading your deep free, please do not exceed the maximum loading capacity mentioned by a level
label (if there is any).
 Connect your deep freezer into a grounded plug with suitable operating voltage and frequency which is
installed in accordance with the regulations.

The operating voltage and frequency of your deep freezer are mentioned on the type label on it.

Before, starting your deep freezer, please make your plug checked by the authorized technical service
or a qualified electrician whether it is suitable for operating the deep freezer.

The repairs on electrical devices should be performed only by qualified personnel. The installation
processes and repairs which are performed unconsciously can cause hazards for the user. Please, consult
the authorized technical service for all your questions and problems related with the product. Please,
do not interfere or allow anyone interfere the product outside the knowledge of the authorized
technical services.

If, there is any problem on the electric cable or the plug, these items should be replaced by the
manufacturer or the technical service agency or an authorized personnel with same authority.

Do not use an extension cord or a multi plug.

Please, make sure that the socket you will plug in your deep freezer is not damaged.

Do not plug in any plugs with damaged, torn or worn cables.

Keeping the electric cable plug and socket at an easily accessible position provides advantage in case of
an emergency/hazardous circumstance.
www.combisteel.com
5