EKO DUO Manuel De L'utilisateur page 9

3.1
DUO Use
DUO is controlled using the action button located on the top face. An LED ring illuminates when the device is powered on.
To
+
2s Power On / Off
Change audio filters
–
Take a recording
Power Save Mode
DUO will automatically power off after 5 minutes of continuous inactivity. To resume DUO, press and hold the action button
for two seconds.
Volume Control
The device's sound level can be amplified in 12 increments. Change the volume level by pressing the top (+) and bottom (-) of
the volume button on the side of the device. Increasing the volume by one level can be confirmed by the increasing number
of LEDs lit in the LED ring.
Do This LED Ring Response
Press and hold the action The active LED turns on/off
button for two seconds.
Press the action button three
The active LED rotates to a new
times quickly.
position corresponding to the
filter type.
The active LED remains on.
Press the action button two
times quickly. Press once to
end recording. Recording will
start after a 0.2 second delay
to prevent button click sound
from being included in the
recording.
Recordings can also be
initiated in the Eko App.
P.
9