Activation After Selecting The Program; Quick Start; De-Activation; Setting The Clock - CASO DESIGN BMG 20 Mode D'emploi Original

Masquer les pouces Voir aussi pour BMG 20:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 64

13.5 Activation after selecting the program

After selecting the program, press the

13.6 Quick start

Utilise this function to program the oven for comfortable cooking at 100% microwave
performance. Press the
press the
for 1 min (max 10 minutes). The oven starts automatically after 2 seconds.
Once the end of the cooking time is reached, four signal tones will be emitted and END will
appear in the display.

13.7 De-activation:

In order to interrupt an ongoing cooking program, you can proceed as follows:
Press the
button once. The cooking program that is in use will be stopped.
Open the door of the device. The cooking program that is in use will be stopped.
► To continue the interrupted cooking program, press the button
door.
To terminate the interrupted program, press the button
► Before beginning a different cooking process you must delete the display and reset the
system by pressing the button

13.8 Setting the clock

To set the clock on the device, proceed as follows:
Activating setup mode
Press button
system to the 24 hour system.
Setting the hours
Turn the control dial Menu/Time until the correct hour is displayed.
Press the
Setting the minutes
Turn the control dial Menu/Time until the correct minute is displayed.
Press the
button in quick sequence to set the cooking time. If you
button once, the oven will work for 30 sec., if you press it twice, it works
Please note
Please note
.
. Press the button once again to switch the oven from the 12 hour
button to save the set hour.
button to save the set time.
button, to start the preset cooking program.
a second time.
after closing the
53

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

3319

Table des Matières