Opening Or Closing The Garage Door (In Normal Operation Mode); Manually Opening Or Closing The Garage Door - tormatic B-600 Mode D'emploi

5.2 Opening or closing the garage door (in normal operation
mode)
The garage door can be operated by different devices (hand transmitter, key
switch etc.). This description only mentions the hand transmitter. Other devices
work in the same way.
1. Briefly press the button on the hand transmitter. Depending on the current po-
sition, the garage door then moves to the OPEN or CLOSE position.
2. If needed, briefly press the button on the hand transmitter to stop the move-
ment of the garage door.
3. If needed, press the button on the hand transmitter once again to make the
garage door move in the other direction.
A button on the hand transmitter can be set with the function "4-
minute light". By using the hand transmitter the light will be turned
on, independently from the drive unit. After 4 minutes the light will
be turned off.
5.3

Manually opening or closing the garage door

Impact and crush hazard due to uncontrolled door movement!
WARNING
By using the quick release uncontrolled movements of the garage
door are possible. The garage door may be out of balance or the
springs might be broken or worn.
•
When installing the system, locking elements of the garage door
NOTICE
drive are dismantled. These should be reinstalled if the garage
door has to be operated manually over a longer period of time.
This way the garage door can be locked when closed.
During adjustments to the garage door, or during power failure, the garage door
can be manually opened or closed.
III
Fig. 16: Disengaging and engaging the drive
Please consult your dealer or manufacturer.
II
I
EN - 67