Control Elements; Functioning Of The Integrated Safety Unit - tormatic B-600 Mode D'emploi

3.4

Control elements

Fig. 2: Control elements
A. Numerical display (A1 digital point)
C. CLOSE button
1. Drive head
3.5

Functioning of the integrated safety unit

If the garage door encounters an obstruction during closing, the operator stops
and releases the obstruction by opening the door to the upper limit position, see
chapter Force learning cycle.
If the garage door encounters an obstruction during opening, the drive stops and
moves back to release the obstruction. The door can be closed again by pulsing.
48 - EN
1
B
A
A1
D
C
B. OPEN / Start button
D. Program button (PROG button)
15. Hand transmitter
15