Menu Operation - DeFelsko PosiTector DPM Guide D'utilisation

Button Functions- Normal Operation
Scroll through
Trend Charts
(Advanced only)
Access the Menu
The Pause/Resume (+) button stops values from automatically
updating to allow for closer examination of the relationship
between the values or to allow time to manually record the entire
dataset. Press (+) again to resume.
Gage functions are menu controlled. To access the Menu, power-up
the Gage, then press the center navigation button.
To navigate, use the Up and Down buttons to scroll vertically and
to SELECT.
Previous Page
(Exit)
Access the Menu
(Center/Select)
When powered-up, the PosiTector automatically
determines which probe is attached and does a self-
check.
To disconnect a probe from a body, slide the plastic
probe connector horizontally (in the direction of the
arrow) away from the body. Reverse these steps to
attach a different probe. It is not necessary to power-
down the Gage when switching probes.
The PosiTector body accepts a wide variety of probe types
including magnetic, eddy current and ultrasonic coating thickness,
surface profile, hardness, salt contamination and ultrasonic wall
thickness probes. See www.defelsko.com/probes

Menu Operation

Menu Operation
Next Page
Up
Down
Press the
pages in a multipage menu.
Press the
the previous menu or page.
Select Exit to exit from any menu.
Probes
Probes
2
Pause / Resume
Restore brightness
after dimming
+
( )
button to switch
(-)
button to return to