Operating With The Remote Control - FUAVE ACS09K01 Manuel D'instructions

Operating with the remote control

• Specifications
Type of remote control
Type of battery
Transmission distance
4 2
Remark: When one of the aforementioned faults occurs,
switch off the airco and check for possible obstacles. Restart
the airco. If the fault persists, switch off the airco and take
the plug out of the socket. Contact your supplier.
Cooling: Press the Mode button until the function light '
Cool' comes on, press the + and – buttons to set the
desired room temperature (17°C – 30°C). Using the FAN
SPEED button on the remote control, you can set the fan
speed to HIGH or to LOW.
Fanning: Press on the Mode button until the 'Fan" function
light comes on. Using the FAN SPEED button on the
remote control, you can set the fan speed to HIGH or to
LOW. The temperature cannot be set.
Dehumidifying: Press on the Mode button until the
'Dry" function light comes on. The fan speed and
temperature cannot be set. The fan starts
automatically on LOW speed (see the section on water
drainage).
RG51B30/CE
2x AAA 1.5 V
8 metres