FUAVE ACS09K01 Manuel D'instructions page 55

Sleep (Economy) operation
The SLEEP function is used to reduce
energy consumption while you sleep.
After all, you don't need the same
temperature to feel comfortable. The
SLEEP function can only be activated
by the remote control. This function can
only be used in the COOL and AUTO
modes.
Press on the SLEEP button when you
go to sleep. After 30 minutes, the set
temperature will decrease or increase by
1°C. And after another 30 minutes, it will
decrease or increase again by 1°C. The
appliance will maintain this newly set
temperature for 7 hours and afterwards
the airco will work according to the
original programmed setting.
LOCK button
Use this button when you want to avoid that all the settings will accidentally
change. A lock symbol will appear on the display when the button is
pressed. If you press again, the LOCK function will be disabled.
Other functions
> Auto-restart
If the airco switches off unexpectedly due to a power cut, then the previous
setting automatically starts after the power is restored.
> Adjusting the airflow
The airflow can be automatically adjusted by setting the shutters manually
to the desired position. Keep the shutters completely open during use.
Do not place any heavy objects or something else on the shutters, this will
damage the airco.
5 2