Fein GWP10 Mode D'emploi page 13

OBJ_BUCH-0000000204-001.book Page 13 Wednesday, April 15, 2015 10:12 AM
en
13
Removing the jaw chuck and the
Fig. 3
3-jaw chuck (figure 3).
The jaw chuck and the 3-jaw chuck can be
removed using the two drifts.
Drift Drift
Mounting the depth stop (figure 4).
Fig. 4
Loosen the handle and insert the depth stop.
Position the depth stop to the required depth
and tighten the handle again.
The depth stop is available as an accessory
2.
(3 21 27 005 00 6).
Depth stop
Handle
1.
3.