Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Chapter 2 | How to use
•
Press the "tare" key once you have placed the bag in the BagOpen
•
Once the "Place sample" light is on, place the sample in the bag: the
sample weight will appear on the control screen.
•
Press the "go" key or press the pedal to start the dilution: the "Operation
in progress..." light is on, indicating that the dilution is being performed.
•
The dilution can be stopped at any time simply by pressing the "stop"
key.
To resume dilution, press the "go" key.
This operation can be repeated as many times as necessary during the
dilution. You can even change pump or diluent this way while a dilution is
being performed.
You can also go back to the beginning of the operation and stop it
completely by pressing twice the "stop" key.
•
Once the dilution is finished, the final weight appears on the control
screen and one of the three green, orange or red lights indicates the
accuracy of the dilution.
•
If you use identical bags and want to perform another dilution, you can
press the "go" key as soon as the new bag has been placed in the
BagOpen
®
. (see § 2.6 Automatic tare of bag).
•
The unit is ready to use again, either for another dilution or for
dispensing.
2.5 Dispensing
Place your BagOpen
on the weighing platform. Insert a sterile bag.
®
First turn the unit on by pressing the power key in front of the keyboard.
Then select the dispensing mode: the "distribution" light must be on; if not,
press on the "mode" key.
14
|
Diluflux Gravimetric Dilutor
®
EN
Thermo Scientific
.
When in dispensing mode, the "dispensing" screen is off. The main screen
blinks as follows:
•
The flashing weight indicates the target mass. This value can be modified
by pressing the
•
Select the pump (right or left) by pressing the "Pump" keys.
The selected pump and amount of liquid to be dispensed remain in memory
even after the machine has been turned off.
•
Press the "go" key or press the pedal to start the dispensing: the
"Operation in progress..." light is on, indicating that the dispensing is
being performed.
•
The dispensing can be stopped at any time simply by pressing the "stop"
key.
•
To resume dispensing, press the "go" key.
•
This operation can be repeated as many times as necessary during
the dispensing. You can even change pump or diluent this way while a
dispensing is being performed.
•
You can also go back to the beginning of the operation and stop it
completely by pressing twice the "stop" key.
•
Once the dispensing is finished, the final weight appears on the control
screen and one of the three green, orange or red lights indicates the
Thermo Scientific
250.0
and
keys.
EN
How to use
|
Chapter 2
15
Diluflux Gravimetric Dilutor
|
Publicité
Chapitres
Table des Matières
