Accessories; Dispensing Platform (Ref Db4001A); Trocar For Broth Bags (Ref Db4002A); Stand For Broth Bags (Ref Db4003A) - Thermo Scientific Diluflux Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

3. Accessories

Several options are available with the Diluflux.
Trocar
Stand for
broth bags
Adjustable
dispensing arm
18
|
Diluflux Gravimetric Dilutor
3
3.1 Dispensing platform
(ref DB4001A)
This platform can be placed very easily on the
Diluflux. It replaces the BagOpen
if you do not
®
use bag but containers or beakers instead.
3.2 Trocar for broth bags
(ref DB4002A)
The stainless steel trocar enables broth bags to
be connected to the Diluflux dilutor tubing. To
do so, just insert the tip into the broth bag and
connect the other end to the Diluflux.
3.3 Stand for broth bags
(ref DB4003A)
This option is very handy when working with sterile
and ready-to-use broth bags. This stand can be
fixed manually under the unit with two screws.
EN
Thermo Scientific
3.4 Adjustable dispensing arm
(ref DB4004A)
An adjustable dispensing arm for all kinds of containers can replace the
fixed arm. It can be adapted to receptacles of different shapes and capacity
as shown in the picture.

3.5 Printer (ref DB4008A)

A printer is specially dedicated to the Diluflux dilutor.
(see § Accessories chapter 1.1)
The printer is connected to the unit via the RS232 output located at the
back of the unit.
The printing starts automatically after each dilution or dispensing.
The printed sticker indicates the following information:
For the dilution:
– "Pump": chosen pump
– "Dilution rate": dilution factor
– "Weight of sample": sample weight
– "Actual weight": real weight measured
at the end of the dilution
– "Precision": dilution accuracy in %
For the dispensing:
– "Pump": chosen pump
– "Theroritical": mass to be dispensed
– "Actual weight": real mass dispensed at
the end of the operation
– "Precision": dispensing accuracy in %
If necessary, the sample number can be
written by hand in the frame in the upper
part of the sticker.
Thermo Scientific
Accessories
|
Chapter 3
Sample No
Pump: Right
Dilution rate: 10
Weight of sample: 24.7 g
Actual weight: 247.5 g
Precision: 99.8 %
Sample No
Pump: Right
Theoretical: 100 g
Actual weight: 100.2 g
Precision: 99.8 %
EN
Diluflux Gravimetric Dilutor
19
|

Publicité

Chapitres

Table des Matières
loading

Table des Matières