Instructions And Warnings For Users Of Robus Gearmotor - Nice Robus350 Instructions Et Recommandations Pour L'installateur

Instructions and Warnings for users of ROBUS gearmotor

Congratulations for having chosen a Nice product
for your automation system! Nice S.p.A. produces
components for the automation of gates, doors, rolling
gates, roller shutters and awnings: gearmotors, control
units, radio controls, flashing lights, photocells and
miscellaneous accessories. Nice uses only the finest
materials and first-class workmanship. It focuses on
the development of innovative solutions designed to
simplify the use of its equipment, dedicating meticu-
lous care to the study of its technical, aesthetic and
ergonomic characteristics: From the wide range of
Nice products, your installation technician will certain-
ly have selected the one best suited to your specific
requirements. However, Nice is not the producer of
your automation system, which is rather the result of a
combination of operations carried out by your installa-
tion technician, namely analysis, evaluation, selection
of materials and system implementation. Each
automation system is unique. Your installation techni-
cian is the only person who possesses the experience
and professionalism needed to set up a system capa-
ble of satisfying your requirements, a system that is
safe, reliable, long lasting and built in accordance with
the regulations in force. An automation system is not
only very convenient; it also improves the level of secu-
rity in your home. Moreover, it will last for years with
very little maintenance. Even though the automation
system you possess meets the safety requirements of
the legislation in force, this does not exclude the exis-
tence of a "residual risk", i.e. the possibility that dan-
gers may arise, usually as a result of improper or
unreasonable use. We have prepared the following list
of do's and don'ts to help you avoid any mishaps:
•Before using your automation system for the
first time, ask the installer to explain the origin of any
residual risks; take a few minutes and read the
users instructions manual given you by the
installer. Retain the manual for future use and deliv-
er it to any subsequent owner of the automation sys-
tem.
•Your automation system is a machine that will
faithfully execute your commands; unreason-
able or improper use may generate dangers: do not
operate the system if there are people, animals or
objects within its range of operation.
•Children: automation systems are designed to
guarantee high levels of safety and security. They are
equipped with detection devices that prevent move-
ment if people or objects are in the way, guaranteeing
safe and reliable activation. However, children should
not be allowed to play in the vicinity of automated
systems; to prevent any accidental activations, keep
all remote controls away from children: they are not
toys!
•Malfunctions: If you notice that your automation is
not functioning properly, disconnect the power supply
to the system and operate the manual release device.
Do not attempt to make any repairs; call the installa-
tion technician and, in the meantime, operate the sys-
tem like a non-automatic gate after releasing the
gearmotor as described below.
•Maintenance: Like any machine, your automation
needs regular periodic maintenance to ensure its long
life and total safety. Arrange a periodic maintenance
schedule with your installation technician. Nice rec-
ommends that maintenance checks be carried out
every six months for normal domestic use, but this
interval may vary depending on the intensity of use.
Only qualified personnel are authorized to carry out
checks, maintenance operations and repairs.
•Do not modify the system or its programming and
adjustment parameters in any way, even if you feel
capable of doing it: your installation technician is
responsible for the system.
•The final test, the periodic maintenance operations
and any repairs must be documented by the person
who has performed them; these documents must
remain under the custody of the owner of the system.
The only recommended maintenance operations that
the user can perform periodically concern the cleaning
of the photocell glasses and the removal of leaves and
debris that may impede the automation. To prevent
anyone from activating the gate release the automation
system (as described below). Use a slightly damp cloth
to clean.
•Disposal: At the end of its useful life, the automation
must be dismantled by qualified personnel, and the
materials must be recycled or disposed of in compli-
ance with the legislation locally in force.
•In the event of malfunctions or power fail-
ures. While you are waiting for the technician to
come (or for the power to be restored if your system
is not equipped with buffer batteries), you can oper-
ate the system like any non-automatic gate. In order
to do this you need to manually release the gearmo-
tor (this operation is the only one that the user of the
automation is authorized to perform): This operation
has been carefully designed by Nice to make it
extremely easy, without any need for tools or physical
exertion.
GB