Control Panel - Orved A Mode D'emploi Et D'entretien

VACUUM CHAMBER
PACKAGING MACHINES
5.4

CONTROL PANEL

MODELS: D - F - G - H - I - J - K - L - M - N - P - Q
1 VACUUM GAUGE ( 0÷1 bar ): MEASURES THE VACUUM IN THE VACUUM CHAMBER.
2 STOP - STOP BUTTON: STOPS THE OPERATING PHASE AND PROCEEDS TO THE NEXT ONE SET;
FOR 380V VERSIONS: IF PRESSED FOR 3 SEC. THE PUMP FUNCTION IS ACTIVATED (CONTINUOUS OPERATION)
3 VAC - VACUUM ADJUSTMENT CONTROL KNOB: ADJUSTS THE PUMP OPERATING TIME TO MAKE IT POSSIBLE TO OBTAIN THE
REQUIRED DEGREE OF VACUUM.
4 GAS - GAS ADJUSTMENT POTENTIOMETER (OPTIONAL): ADJUSTS THE QUANTITY OF GAS DELIVERED.
5 SEAL - SEALING TIME ADJUSTMENT POTENTIOMETER: ADJUSTS THE BAGS SEALING TIME.
6 SOFTAIR - SOFTAIR POTENTIOMETER (OPTIONAL): ADJUSTS THE CHAMBER DEVACUMATE TIME.
7 ON/OFF - MAIN SWITCH: MACHINE ON/OFF AND INTERRUPT CYCLE.
mod. H
mod. J
mod. K
1
mod. L
mod. N
mod. P
mod. Q
•
•
1 2 3
mod. D
MODELS: A - B - C - D - F
1 VACUUM GAUGE ( 0÷1 bar ): MEASURES VACUUM IN THE VACUUM CHAMBER.
2 ON/OFF - MAIN SWITCH WITH RED INDICATOR LED:
MACHINE ON/OFF AND INTERRUPT CYCLE.
3 THREE-DIGIT DOUBLE DISPLAY
- TOP THREE DIGITS: INDICATE THE PROGRAM ENTERED OR FUNCTION ACTIVATED:
Pr1 = PROGRAM SELECTED
VAC = VACUUM
SAL = SEALING
GAS = GAS INLET
SOF = SLOW AIR RETURN
JAR = JARS FUNCTION - (EXTERNAL CONTAINERS AND CHANNELLED BAGS VACUUM).
- BOTTOM THREE DIGITS: INDICATE THE VALUE RELATIVE TO THE FUNCTION ACTIVATED AND THE CODE OF THE OPTIONS
AVAILABLE: G = GAS / S = SOFTAIR; ALSO INDICATES THE NUMBER OF CYCLES PERFORMED AND THE OIL CHANGE ALARM.
4 CURSOE: PROGRAM SELECTION FROM "0" TO "9";
INCREASES/DECREASES THE VALUE OF EACH FUNCTION IN THE PROGRAM.
5 PROG - PROGRAMMING BUTTON: MAKES IT POSSIBLE TO ENTER PROGRAMMING OF THE INDIVIDUAL FUNCTIONS
6 SEL - FUNCTIONS SELECTION KEY: SELECTS THE FUNCTION TO BE PROGRAMMED
7 JARS - KEY FOR ACTIVATING VACUUM INSIDE OUTSIDE CONTAINERS AND/OR CHANNELLED BAGS:
ACTIVATES/ DEACTIVATES THE EXTERNAL EVACUATION SYSTEM OF CONTAINERS AND/OR CHANNELLED BAGS
8 STOP - STOP BUTTON: STOPS THE WORK CYCLE
REV. 00 - Cod.: 1500159
WITH ELECTRO-MECHANICAL CONTROLS
•
2
4 5 7
WITH DIGITAL CONTROLS
•
•
•
1 4 5
3 4 5
1 2
mod. F
•
•
3 6 8
49
INSTALLATION
•
6
3 4 5 6
•
•
•
2
7
Operation and maintenance manual / Ed. 02 - 2006
GB
7
7
GB