Publicité
Ford Transit P.U.
04/2000 - ....
Ref. 1243
Fitting instructions
Remove the screws of the towing eye; some models also have 2 screws on the right side, with tubes going
into the chassis, so remove also these possible screws. The tubes don't need to be removed. If there are no
tubes in the chassis, insert in the chassis the tubes (-f) that are included in the delivery.
Put the mounting pieces (-e) with points A on the predrilled holes and insert the included bolts and
washers using the outside of the chassis beam, however, without fastening anything yet.
Bring the tow bar between the mounting pieces with (B) and (B') matching points (B) and (B') of the
mounting pieces. Insert the bolts and screw everything well.
Mount (*) and tighten everything well
Note: On vehicles that are not having the screws on the right side the bumper has to be removed so the
distance tubes (-f) can be brought in the chassis.
Composition
Tow bar reference 1506
1 flange ball 50T
2 safety wahshers M16 – DIN128
2 bolts M16 x 50 – DIN933
2 nuts M16 – DIN934
1 safety bracket (800024)
4 bolts M12x90 – DIN931
4 bolts M12x35 – DIN 933
6 nuts M12 – DIN 934
4 washers 40x12x4
8 safety washers M12 – DIN128
2 mounting pieces –e
2 mounting pieces –f
All bolts and nuts : quality 8.8
Note
Please consult your cardealer or owners manual for the maximal permissable towing mass.
Remove any bitumen coating on the fastening position for the tow bar.
Whenn drilling, be carefull not to damae any brake lines, electrical wiring or fuel lines.
(*)
(*)
(*)
(*)
(*)
(A)
(B-B')
(A-B')
(A)
(A-B-B')
(B-B')
(A)
Publicité
