Publicité
Les langues disponibles
Les langues disponibles
INSTRUCTIONS
WILGA 2000
For electric power and three Li-Po cells
This model requires a four-function radio control system
Specification
Wingspan approx.
Fuselage length excl. spinner approx.
Total surface area approx.
All-up weight according to
fittings approx.
Longitudinal dihedral
CG position, measured from
wing root leading edge
Introduction
The GRAUPNER WILGA 2000 is a good-looking ultra-lightweight aerobatic
trainer. At the development stage we placed great emphasis on low all-up weight,
and this is reflected in the aeroplane's excellent flying characteristics and
performance. The handling of the WILGA 2000 makes it the ideal first "full-house"
model aircraft, as it is capable of simple aerobatics. The selected wing section
endows the model with very good-natured, neutral flying characteristics. The
aircraft is built primarily of high-density foam, while the wing is fitted with a carbon
fibre spar.
The two-part wing makes the model easy to transport. Completing the machine
only involves a few procedures, such as installing the fin. The tailplane is
attached to the fuselage using two pan-head self-tapping screws.
A four-function RC system is quite sufficient to fly this model.
Caution: this model is not a toy!
If you are a beginner to this type of powered model, please ask an experienced
model flyer for help and support. If you attempt to operate the model without knowing
what you are doing, you could easily injure yourself or somebody else. Please keep
your safety and well-being in mind at all times.
Important Safety Notes
GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY
Änderungen vorbehalten! Keine Haftung für Druckfehler
1060 mm
845 mm
54.5 dm²
540 g
approx. 0.5°
approx. 63 mm
29
Order No. 9371
04/2007
Publicité
