Swing Operation; Economy Operation - Friedrich MW18Y3H Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

SWING OPERATION

Begin air conditioner operation before performing this procedure.
To select SWING Operation
Press the SWING button (Fig. 6 b11).
The SWING Display (Fig. 7 c7) will light.
Each time the SWING button is pressed, the swing operation will change in the
following order.
Up/down swing operation
Swing operation stops
To stop SWING Operation
Press the SWING button and select STOP.
Airfl ow direction will return to the setting before swing was begun.
About Swing Operation
● Up/down swing: Swing operation begins using the following
range according to the current airfl ow direction.
Airfl ow direction is 1–4 (for cooling, dry).
With the upper airfl ow-direction louver in the horizon-
tal position, the lower airfl ow-direction louver moves
(swings) to direct airfl ow to a wide area.
Airfl ow direction is 3–6 (for heating).
With the airfl ow-direction louvers set for downward or
straight down airfl ow, airfl ow is directly mainly at the
fl oor.

ECONOMY OPERATION

Begin Air Conditioner operation before performing this procedure.
To Use the ECONOMY Operation
Press the ECONOMY button (Fig.6 b4).
The ECONOMY Indicator Lamp (green) (Fig. 3 a7) will light.
Economy operation begins.
To Stop the ECONOMY Operation
Press the ECONOMY button (Fig.6 b4) again.
The ECONOMY Indicator Lamp (green) (Fig. 3 a7) will go out.
Normal operation begins.
About ECONOMY Operation
At the maximum output, ECONOMY Operation is approximately 70% of normal air conditioner operation for cooling and heating.
When ECONOMY operation is performed during the cooling mode, dehumidifi cation is improved. This function is especially con-
venient when you want to remove the humidity in the room without signifi cantly lowering the room temperature.
During ECONOMY operation, the thermostat setting automatically changes according to the temperature to avoid Unnecessary
cooling and heating for the most economical operation.
● If the room is not cooled (or heated) well during economy operation, select normal operation.
● During the monitor period in the AUTO mode, the air conditioner operation will not change to ECONOMY operation even if ECON-
OMY operation is selected by pressing the ECONOMY operation button.
● When economy operation mode is operated, the room temperature will be little higher than the set-temp under cooling mode and
lower than set-temp under heating mode. Therefore, the economy mode is able to save more energy than other normal mode.
En-11
9315345288_OM.indb 11
9315345288_OM.indb 11
Left/right swing operation
Up/down/left/right swing operation
● Left/right swing: The airfl ow-direction louvers move (swing)
in the left/right airfl ow direction.
● Up/down/left/right swing: The airfl ow-direction louvers move
(swing) in both the up/down and left/right airfl ow directions.
● The SWING operation may stop temporarily when the air
conditioner's fan is not operating, or when operating at very
low speeds.
● If the SET button(Vertical) is pressed during the up/down
swing operation, the up/down swing operation will stop and
if the SET button(Horizontal) is pressed during the left/right
swing operation, the left/right swing operation will stop.
● Indicator Lamp
OPERATION
TIMER
ECONOMY
: Lighting
: OFF
2/24/2010 1:36:25 PM
2/24/2010 1:36:25 PM

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Mw24y3hMr18y3hMr24y3h

Table des Matières