Before Starting - Pentair MICROBRITE 620424-EU Manuel D'utilisation

6
INSTALLATION IN 1.5" WALL FITTING
The following describes how to install the MicroBrite
light in a 1.5" wall fitting.
BEFORE STARTING: The following information
describes the tasks that must be completed by the
electrician before the light wall fitting is installed. See
figure below.
Waterproof connection
15 cm extra cord
To technical room
COMPATIBLE WALL FITTINGS
PENTAIR 86205100
PENTAIR 542429
PENTAIR 542402
PENTAIR 542414
PENTAIR 542411 (not recommended))
PENTAIR 86205100
PENTAIR 542405
PENTAIR 542404
The MicroBrite light adaptor allows the mounting of the MicroBrite light in the 1.5" return fitting. Refer to the
compatible MicroBrite light wall fittings table above.
MicroBrite color led light for pool and spa Installation and User' s Guide
LIGHT INSTALLATION
the Electrician Wiring Rules (see page 4).
The Junction Box must be installed as shown below. The
low voltage transformer (compliant with NF EN 61558-2-6)
must be located in the technical room.
IP65 (ex : Pentair G-DECKBOX-1)
HAYWARD
WATERWAY
WATERWAY
WATERWAY
WATERWAY
CMP
CMP
CMP
Electrical wiring to the lighting must be
in accordance with the latest edition of
SP1022
215-9170B
400-9150B
215-9890B
400-9170B
CMP25550001060
CMP25522100000
CMP25550000000