Antari M-4 Mode D'emploi page 8

If the optional wireless remote control function is selected and included, a radio signal
receiver is tested and pre-attached on the machine. The included transmitter also has been
paired with the attached receiver before shipping.
To activate or deactivate the wireless remote control function, press [Menu] until the LCD
displays "Wireless". Then press the ▲ or ▼ button to turn on or off the wireless remote
control function. Once the wireless remote control function is turned on, the letter"W"will
be displayed on the LCD screen.
Registering transmitter
Transmitter can be paired or deleted from the receiver. Each receiver can pair up to 10
transmitters. Follow below steps to pair or delete transmitter from receiver.
Step 1: Power off M-4 Fogger
Step 2: Press and hold [DOWN] button
Step 3: Turn power on and release [DOWN] button when LCD display blinks
Step 4: Follow the menu instruction to pair or delete transmitter
Notes:
One machine can be controlled by up to 10 transmitters while one transmiter can be paired
with an unlimited number of machines.
8