BFX-708 Specifications
Effect Programs
48 types (43 effects + 4 amp simulator settings + ZNR)
Effect Modules
4 modules + amp simulator + ZNR
Sampler Function
Maximum recording time: 6 seconds
Playback speed control
<MOD and REV modules are temporarily turned off when sampler function is used>
Patch Memory
USER: 6 banks x 5 = 30 (rewritable, with store)
PRESET: 6 banks x 5 = 30
Total 60 patches
Sampling Frequency
31.25 kHz
A/D Conversion
20-bit, 64-times oversampling
D/A Conversion
20-bit, 128-times oversampling
DSP
ZOOM original ZFx-2
Input
Bass input : standard mono phone jack
(Nominal input level -20 dBm, input impedance 470 kilohms) Input signal can be attenuated by 6 dB
Also serves as AUX IN for standard stereo phone jack
Output
Combined line/headphone output
Standard stereo phone jack
(maximum output level = +3 dBm with output load impedance of 10 kilohms or higher)
Display
6-position alphanumeric LED display
2-position 7-segment LED display
Power Supply
AC adapter (available separately)
9 V DC, center minus, 300 mA (ZOOM AD-0006)
Batteries: IEC R6 (size AA) x 4
Continuous operation: approx. 14 hours (with alkaline batteries)
External Dimensions
235 mm (W) x 189 mm (D) x 54 mm (H)
Weight
740 g (without batteries)
* 0 dBm = 0.775 Vrms
* Design and specifications subject to change without notice.
ZOOM CORPORATION
NOAH Bldg., 2-10-2, Miyanishi-cho, Fuchu-shi, Tokyo 183-0022, Japan
PHONE: 042-369-7116 FAX: 042-369-7115
Printed in Japan 708-5050