Piece Counting - Mettler Toledo GM303 Mode D'emploi

u N I 0 0 .
9
10
u 4 4 3 2 .
9
F
u N I 1 0 . PCS
u 4 1 7 . 5 PCS
u 7 5 6. 0
9

2.2 Piece counting

Preparation
Set Unit 2 in the configuration register to "PCS" as described in the operating instructions of the
balance in the section "Configuring – Unit selection".
Counting in (counting out)
Load empty (full) container, tare.
Form reference: add (take out) 10 parts.
Store reference: press key ©.
In counting out, the piece count is displayed with a negative sign.
Add (take out) the number to be determined.
In counting out, the piece count is displayed with a negative sign.
Switching between piece count and weight: press key ª.
Note
If the © key is pressed again, the weight currently loaded will be stored as a new reference
(10 PCS).
7