Mounting Instructions; Monitor Housing; Cable Installation Instructions - FloTech FT208 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

FloTech Programmable CheckMate Retain / Overfill Monitor

Mounting Instructions

Fig. 2
Mounting Hole Detail

Monitor Housing

The FloTech model FT208 CheckMate Retain / Overfill Monitor
Housing is typically mounted in the trailer fitting storage box or
any flat surface within easy view of the bottom loading
connections. Leave the top cover on the monitor housing and hold
it in the position you wish to mount it. Using a black marker,
transfer the pattern of the four mounting holes to the mounting
surface. BEFORE drilling, check to make sure you will not drill
through or damage any existing trailer wiring or piping. Drill the
holes through and mount the monitor using four 5/16 inch nuts and
bolts.

Cable Installation Instructions

FloTech recommends you use FT404 jacketed 11-conductor cable
for up to 8 compartment systems. This cable is specially designed
to be oil, UV, and abrasion resistant. It incorporates a
Page 6
REV G
FT208 CheckMate

Publicité

Chapitres

Table des Matières
loading

Table des Matières