FloTech Programmable CheckMate Retain / Overfill Monitor
Introduction
This Manual describes the features, installation, programming,
operation and troubleshooting techniques for the FloTech FT208
CheckMate Programmable Retain / Overfill Onboard Monitor.
Monitor Features
The FloTech FT208 CheckMate Retain / Overfill Monitor has the
following features:
-
Operates on 12 VDC or 24 VDC systems.
-
Monitors up to eight overfill sensors.
-
Monitors up to eight retain sensors.
-
Top Only or Top and Bottom configuration.
-
Connects to Float, Thermistor or Optic style rack
connections.
-
Non I.S. Relay Output
-
The monitor is field programmable.
Simple Wiring – no jumpers, terminators or dummies
-
required
-
Compatible with Two Wire or Five Wire type sensors.
Page 4
Fig. 1 FT208 Monitor
REV G
FT208 CheckMate