Mounting Instructions; Monitor Housing - FloTech FT204P Mode D'emploi

FloTech Programmable Retain / Overfill Monitor

Mounting Instructions

Fig. 2
Mounting Hole Pattern Detail

Monitor Housing

The FloTech model FT204 Retain / Overfill Monitor Housing is
typically mounted on the trailer main frame rail, fitting storage
box, or any flat surface within easy view of the bottom loading
connections. Leave the top cover on the monitor housing and
hold it in the position you wish to mount it. Using a black
marker, transfer the pattern of the four mounting holes to the
mounting surface. BEFORE drilling, check to make sure you
will not drill through or damage any existing trailer wiring or
piping. Drill the holes through and mount the monitor using
four 3/8 inch nuts and bolts.
6 10464 REV C